A stainless steel wall-mount chimney range hood fixed to a white subway tile wall in a US home kitchen, the range hood's rectangular chimney cover rising straight to the ceiling, soft steam rising from a pot into the canopy, the range hood filling the upper half of the frame, the cooking surface below cropped and out of focus at the bottom edge.

Zephyr
Range Hood Repair

Zephyr hoods with unresponsive touch controls, dim lamps or a fan that drifts on without being asked are checked at your home.

(844) 398-3217

Mon–Sat, 8am–8pm

  • 4 range hood types
  • 7 problems we see
  • 12 error codes

Book a visit

Three short steps, about a minute.

or call (844) 398-3217

Zephyr range hoods,
specifically.

Zephyr is a ventilation specialist with a broad catalog: wall, island and under-cabinet hoods, inserts, downdrafts and custom hoods, plus the lower-priced Essentials line. Many of its hoods talk back through a small display, an LCD or blinking buttons, and a lot of calls we get turn out to be a reminder or a setting rather than a failed part. We read that signal first, then test the blower, the lights and the duct.

The Zephyr lineup

What is particular
to Zephyr.

We repair Zephyr wall, island and under-cabinet hoods, power-pack inserts and downdrafts such as the Lift and Treviso, including Zephyr Essentials models like Firenze. Zephyr Connect hoods add Bluetooth and WiFi through the app, which we check along with the keypad.

Filter hours are counted

Depending on the model, Zephyr counts 30 or 60 fan hours before asking for clean mesh filters and 120 hours before asking for charcoal. The signal can be a letter, a blinking button or a scrolling sentence, so we match it to your model before touching anything.

An airflow cap called ACT

Airflow Control Technology lets the installer limit top airflow to meet local rules, which also removes speeds. Holding the power button with the hood off shows the setting, which settles many complaints about a hood that seems weaker than advertised.

A fan that runs on a schedule

Some Zephyr hoods have a Clean Air feature that turns the fan on every 4 hours for 10 minutes. A hood that starts on its own at night is often just this, not a stuck relay.

Power reset first

For most control problems Zephyr's own advice is to switch the breaker off for 5 to 10 minutes. We ask whether that has been tried, because it saves a visit when it works and points us to the control board when it does not.

Parts

Zephyr manuals list part numbers for LED modules, baffle filters and remote kits, and parts are sold through its online store. Blowers for downdrafts and some inserts are separate models, so we note the blower number as well as the hood.

Repair or replace

A control board, a keypad, an LED module or a blower is usually worth replacing on a Zephyr that is otherwise sound and installed at the right height. If the hood is undersized for the burners or the duct is too small, fixing the part will not fix the smoke, and that belongs in the conversation.

Book your Zephyr visit

Not a
Zephyr?

Zephyr is one of 29 range hood makes on this site. The other 28 each have a page of their own.

All 29 brands
A family cooking together under a stainless range hood in a bright kitchen.
For the heart of your home.

Questions about
Zephyr range hoods.

Why does my Zephyr hood turn on by itself?
Two common reasons are the Clean Air feature, which runs the fan every 4 hours for 10 minutes, and a remote paired on the wrong channel. Both are settings rather than broken parts.
What does Zephyr suggest when the controls stop responding?
Turn the breaker off for 5 to 10 minutes and back on. If the panel is lit but still ignores touches after that, the control board or keypad needs a technician.
Why do I feel cold air coming through my Zephyr hood?
Zephyr points to duct joints that are not sealed and a missing backdraft damper. A damper that flaps in wind usually comes back to the outside wall cap.
How high should a Zephyr hood hang?
Zephyr's guidance is to mount within the range the manual gives, as close to the minimum as you can, because a hood mounted too high misses smoke.

Back to your everyday

Book your Zephyr visit.

Have the range hood's model number ready — on Zephyr it decides which parts come on the first visit.

(844) 398-3217 Schedule a repair