RangeHoodeRepair.center (844) 398-3217Mon–Sat, 8am–8pm Book a visit
A stainless steel wall-mount chimney range hood fixed to a white subway tile wall in a US home kitchen, the range hood's rectangular chimney cover rising straight to the ceiling, soft steam rising from a pot into the canopy, the range hood filling the upper half of the frame, the cooking surface below cropped and out of focus at the bottom edge.

Vent-A-Hood
Range Hood Repair

Vent-A-Hood hoods and liners get a kitchen visit that opens the blower housing first to see the grease it has collected.

(844) 398-3217

Mon–Sat, 8am–8pm

  • 4 range hood types
  • 7 problems we see
  • 1 error codes

Book a visit

Three short steps, about a minute.

or call (844) 398-3217

Vent-A-Hood range hoods,
specifically.

Vent-A-Hood is a Texas maker that has built hoods since 1933 around its Magic Lung blower, which spins grease out of the air instead of catching it in a filter. That design moves most of the service work into the blower housing: a wheel that rubs or knocks, a damper held shut, or grease left in the housing. We bring the tools to open the housing, check each blower and its matching wheel, and follow the duct as far as we can reach.

The Vent-A-Hood lineup

Builds4 range hood types

Wall-mount range hood · Under-cabinet range hood · Island range hood · Range hood insert

Called out forRange Hood Runs but Barely Pulls Smoke

and 6 more problems on Vent-A-Hood

Repairs we do10 repairs, on any make

Range hood diagnostic visit · Range hood blower motor repair · Range hood fan switch and control repair · Range hood control board repair

Error codesBlower jumps from LOW to full power

1 Vent-A-Hood code with a page of their own

The Vent-A-Hood
lineup.

Vent-A-Hood builds 4 of the 4 range hood types this site covers. Which one decides how the visit is planned.

All range hood types
Wall-mount

Wall-mount range hood

5 of the problems we see on Vent-A-Hood come up on it Wall-mount range hood repair Under-cabinet

Under-cabinet range hood

3 of the problems we see on Vent-A-Hood come up on it Under-cabinet range hood repair Island

Island range hood

3 of the problems we see on Vent-A-Hood come up on it Island range hood repair Insert or liner

Range hood insert

3 of the problems we see on Vent-A-Hood come up on it Range hood insert repair

What is particular
to Vent-A-Hood.

We work on Magic Lung wall-mount, under-cabinet and island hoods, the liner inserts made for custom hood enclosures, the Low-Profile and ductless ARS hoods, and the M-Line hoods that use stainless baffle filters. The model and serial numbers are written in the owner's guide and on the hood, and the guide uses the blower model (B100, B200, T200, T400) to describe capacity.

No grease filters to change

The Magic Lung blower throws grease out of the airstream by centrifugal force and collects it in the blower housing and a removable E-Z Clean shield. On a Vent-A-Hood, weak draw or smoke in the room is traced to that housing, the wheel and the duct rather than to a clogged mesh filter.

White wheels, black wheels

Hoods with more than one blower pair white wheels with white motor rings and black wheels with black ones, and the two spin in opposite directions. A wheel put back on the wrong motor after cleaning makes the hood pull poorly, so we check the pairing before anything else.

A damper that screws can jam

Vent-A-Hood names screws poking through the duct as the most common reason its damper will not open. A hood that roars but pulls little often has a flap held shut just above the blower, which we reach by removing the housing.

Switches, not a screen

Controls are rocker switches or dials, with the red rocker running the two-speed blower and its SensaSource heat sensor. The manual also warns never to add a solid-state speed control, which matters when someone has wired in a wall dimmer.

Parts

Vent-A-Hood lists its own part numbers for common service items, such as the P1350 LED bulb used on hoods built since 2016. Motors, wheels and switches are ordered by the blower model and hood style, so we note both on the first visit.

Repair or replace

A Magic Lung hood is built to be taken apart, so a worn motor, a bent wheel, a failed switch or a dead light is normally repaired rather than replaced. Replacement makes more sense when the canopy itself is damaged or the hood is too small for the cooking surface it sits over.

Book your Vent-A-Hood visit

What we are
called out for.

On Vent-A-Hood, most often range hood runs but barely pulls smoke.

All problems

Vent-A-Hood error codes

Blower jumps from LOW to full powerMode, not a failure All Vent-A-Hood codes
A stainless wall-mount chimney range hood on a tiled wall fills the upper half of the frame, a haze of cooking steam spilling past the front and side edges of the range hood's canopy and hanging in the kitchen air, a mesh grease filter under the canopy visibly dark with grease.

Range Hood Runs but Barely Pulls Smoke

7 causes, cheapest first

 Close view from below of the underside of a stainless wall-mount range hood, one baffle filter hanging slightly crooked out of its track and the blower's intake visible in shadow behind it, the rest of the range hood's filters seated flat.

Range Hood Too Loud: Roar, Whine or Grinding

6 causes, cheapest first

 A stainless island range hood hanging from the ceiling over a kitchen island fills the upper half of the frame, its chimney cover sections slightly misaligned at the joint and one baffle filter visibly loose in its track on the range hood's underside, the island counter below empty and out of focus.

Range Hood Rattles or Shakes While It Runs

6 causes, cheapest first

 Close view looking up at the underside of a stainless under-cabinet range hood below white cabinets, two recessed lights in the range hood's underside, one glowing warm and the other dark with a slightly browned lens, the mesh filters between them clean.

Range Hood Lights Out or Flickering

6 causes, cheapest first

 A stainless under-cabinet range hood below white kitchen cabinets fills the upper half of the frame, its lights on but steam from a simmering pot below curling out past the front edge of the range hood and up against the cabinet doors instead of into the canopy.

Range Hood Fan Not Working at Any Speed

6 causes, cheapest first

 A stainless wall-mount chimney range hood on a tiled wall in winter light fills the upper half of the frame, faint cold condensation beading on the range hood's lower edge and a fine mist visible drifting down from the canopy, the burners below off.

Cold Draft or a Flapping Damper Through the Range Hood

6 causes, cheapest first

Not a
Vent-A-Hood?

Vent-A-Hood is one of 29 range hood makes on this site. The other 28 each have a page of their own.

All 29 brands

Vent-A-Hood range hood repair,
where we come out.

9 metros, each with its own page.

All service areas

Tampa BayFL · 31 areas

OrlandoFL · 30 areas

Miami / South FloridaFL · 47 areas

New York MetroNY · 75 areas

HoustonTX · 36 areas

ChicagoIL · 50 areas

Los AngelesCA · 95 areas

San DiegoCA · 31 areas

San Francisco Bay AreaCA · 74 areas

A family cooking together under a stainless range hood in a bright kitchen.
For the heart of your home.

Questions about
Vent-A-Hood range hoods.

Where are the filters on my Vent-A-Hood?
A Magic Lung hood has none. Grease collects in the E-Z Clean blower shield and the blower housing, which come off for washing in a sink or dishwasher with the power off; only the M-Line models use stainless baffle filters.
Why is my Vent-A-Hood making a scraping noise after I cleaned it?
Vent-A-Hood traces that sound to a wheel touching the front of the housing or the motor mount screws. The housing may not be seated, or the wheel may sit too far forward or back on the motor shaft, and both are quick to set right.
My Vent-A-Hood runs but smoke still escapes. What should I check?
The maker's list starts with hood size and mounting height, then smooth metal duct of the right size, then a damper that swings freely. If those are fine, the blower wheels may be mismatched or caked, and that is where a visit helps.
Does Vent-A-Hood have error codes?
No. Its hoods use switches and dials without a display, so the signals you get are sounds and speed changes, such as the SensaSource sensor pushing the blower to full power on high heat.

Back to your everyday

Book your Vent-A-Hood visit.

Have the range hood's model number ready — on Vent-A-Hood it decides which parts come on the first visit.

Schedule a repair Call (844) 398-3217
(844) 398-3217 Schedule a repair