KitchenAid hood shows Snd: the beeps were turned on or off
Holding the Light button for 5 seconds toggles the hood's beeps.
Mon–Sat, 8am–8pm
- Mode, not a failure
- No repair needed
- Source: KitchenAid
Book a visit
Three short steps, about a minute.
or call (844) 398-3217
Loading appointment form…
The appointment form couldn’t load. Please try again.
What Snd
actually means.
Holding the Light button for 5 seconds toggles the hood's beeps. When sound is turned on, a tone plays and Snd shows for 3 seconds; when it is turned off, Snd shows for 3 seconds without the tone. It is easy to trigger by leaning on the Light button.
KitchenAid range hood display
What to do when Snd shows on the range hoodKind of codeMode, not a failure
The hood is doing something it was told to do, not wearing out: a delay-off timer that keeps the blower running for some minutes after the burners go off, a heat sentry that starts the fan by itself when it senses a hot pan, a Sabbath setting that locks the keys and dims the lights, or a link to the cooking surface that sets the speed on its own. No part is needed; a key sequence from the manual, or simply waiting, ends it.
Usually leads toNo repair
Hold the Light button for 5 seconds again to switch the beeps back the way you want them.
Shows up asReading a Range Hood Error Code or Blinking Light
A range hood error code may appear as letters and numbers on a display, a light that blinks in a pattern, a filter reminder that will not clear, or a beep with the fan refusing to start.
MakeKitchenAid
KitchenAid range hoods with a fan that stalls, lamps that stay dark or buttons that do nothing are checked in the kitchen they serve.
SourceKitchenAid 30" and 36" range hood installation instructions and use and care guide W10674120
KitchenAid 30- and 36-inch under-cabinet hood, guide W10674120.
Before you book,
in this order.
Each step comes from KitchenAid's own guidance for Snd on its range hoods. Follow it to the end: the last card says whether this is a visit.
Hold the Light button for 5 seconds again to switch the beeps back the way you want them.
Listen for the tone: a tone with Snd means sound is now on.
If the display shows Snd without anyone pressing Light, book a visit so the keypad can be checked.
Cleared?
The code is gone and the blower pulls steam up on every speed again without a new part. If it returns this week, or the filter reminder keeps coming back right after a cleaning, mention it in the booking.
What not to do
Snd is not an error message and does not affect the fan or lights. A light that will not turn off because the Light button is being held is a different complaint from a stuck button.
What you may
notice with it.
The range hood problems Snd tends to arrive with. Answer these at the range hood before anyone is booked.
All problems
No repair indicated
Nothing to repair.
The hood is doing something it was told to do, not wearing out: a delay-off timer that keeps the blower running for some minutes after the burners go off, a heat sentry that starts the fan by itself when it senses a hot pan, a Sabbath setting that locks the keys and dims the lights, or a link to the cooking surface that sets the speed on its own. No part is needed; a key sequence from the manual, or simply waiting, ends it.
KitchenAid
range hoods.
KitchenAid range hoods with a fan that stalls, lamps that stay dark or buttons that do nothing are checked in the kitchen they serve.
KitchenAid range hood repairMore KitchenAid codes
Mode, not a failure on other makes
Wall-mount range hood
The chimney hood fixed to a bare stretch of wall above the burners, its canopy catching the rising smoke while a telescoping cover hides the duct that climbs to the ceiling.
Under-cabinet range hood
The slim hood screwed to the bottom of the wall cabinet over the burners, venting up through that cabinet or back through the wall, or cleaning the air and returning it to the room.
Island range hood
The hood that hangs from the ceiling over burners set into a kitchen island, open on all four sides, with its duct and wiring hidden inside a chimney that drops from above.
In KitchenAid's own words
If the audible signal is activated, a tone will sound and “Snd” symbol will appear in the display for 3 seconds.
Every code on this site is taken from the manufacturer's documentation, never from a forum or a parts listing. KitchenAid 30- and 36-inch under-cabinet hood, guide W10674120.
KitchenAid Snd range hood repair,
where we come out.
The same visit in every metro below: the code, the model number, and a diagnosis before any part is ordered.
All service areasTampa BayFL · 31 areas
Miami / South FloridaFL · 47 areas
New York MetroNY · 75 areas
HoustonTX · 36 areas
ChicagoIL · 50 areas
Los AngelesCA · 95 areas
San DiegoCA · 31 areas
Questions
about Snd.
Can I clear Snd myself?
How do I stop my KitchenAid hood from beeping?
My KitchenAid hood shows Snd and the lights went off. Is that normal?
Can Snd show up on its own on a KitchenAid hood?
Back to your everyday
Still showing Snd?
Three things make the booking useful: the letters or blink pattern exactly as they showed, the full model number from the label behind the filters, and whether the fan still moves air on every speed. With those, the technician arrives with half the answer already worked out.