Monogram pyramid hood air-quality light: what its colors mean
Monogram's pyramid hoods with Air Quality Sensors carry an LED that changes color as the air near the hood changes.
Mon–Sat, 8am–8pm
- Heat and grease sensors
- Range hood heat sensor repair
- Source: Monogram
Book a visit
Three short steps, about a minute.
or call (844) 398-3217
Loading appointment form…
The appointment form couldn’t load. Please try again.
What Indoor Air Quality (IAQ) LED
actually means.
Monogram's pyramid hoods with Air Quality Sensors carry an LED that changes color as the air near the hood changes. The sensor stays inactive until the hood is commissioned to Wi-Fi through the SmartHQ app. Monogram presents the reading as a general sign of change, not a measurement.
Monogram range hood display · also shown as air quality light changing color
What to do when Indoor Air Quality (IAQ) LED shows on the range hoodKind of codeHeat and grease sensors
A sensor inside the canopy has stopped telling the control a believable story: the heat sensor that starts the fan when the air above the burners gets hot, or on some hoods a sensor that reads grease or steam to set the speed. One that reads hot all the time keeps the blower running with the burners long cold; one that reads nothing leaves the automatic mode doing nothing. The sensor, its wiring and the canopy around it are checked at the visit.
Usually leads toRange hood heat sensor repair
Testing the sensor that starts the fan by itself when the burners get hot, so the hood starts when it should and stops when the heat is gone.
Shows up asReading a Range Hood Error Code or Blinking Light
A range hood error code may appear as letters and numbers on a display, a light that blinks in a pattern, a filter reminder that will not clear, or a beep with the fan refusing to start.
MakeMonogram
Monogram hoods and hood inserts are repaired in place, working from the control panel back to the blower and the damper.
SourceMonogram 30, 36, 48 inch wall vent hood owner's manual 49-7000234 (ZVWS301, ZVWS361, ZVWS481)
Monogram ZVWS301/ZVWS361/ZVWS481 wall pyramid chimney hoods with Air Quality Sensors, manual 49-7000234. The ZVIS361/ZVIS481 island hoods are sold with the same Air Quality Sensors name; their manual was not read.
Before you book,
in this order.
Each step comes from Monogram's own guidance for Indoor Air Quality (IAQ) LED on its range hoods. Follow it to the end: the last card says whether this is a visit.
If the LED is dark, connect the hood: hold FAN for 3 seconds and complete setup in SmartHQ.
If the color moves with nothing cooking, look for other sources such as candles or an open bottle of wine.
Run the fan if the kitchen smells; otherwise no action is needed.
If the hood is online and the LED never changes, book a visit.
Still there?
It usually turns into range hood heat sensor repair. Book with the code and the model number.
What not to do
A color change is not an error code and says nothing about the blower or filters. A dark LED on a hood that was never connected is expected.
What you may
notice with it.
The range hood problem Indoor Air Quality (IAQ) LED tends to arrive with. Answer these at the range hood before anyone is booked.
All problems
Where Indoor Air Quality (IAQ) LED usually leads
Range hood heat sensor repair.
Monogram
range hoods.
Monogram hoods and hood inserts are repaired in place, working from the control panel back to the blower and the damper.
Monogram range hood repairMore Monogram codes
Heat and grease sensors on other makes
Wall-mount range hood
The chimney hood fixed to a bare stretch of wall above the burners, its canopy catching the rising smoke while a telescoping cover hides the duct that climbs to the ceiling.
Under-cabinet range hood
The slim hood screwed to the bottom of the wall cabinet over the burners, venting up through that cabinet or back through the wall, or cleaning the air and returning it to the room.
Island range hood
The hood that hangs from the ceiling over burners set into a kitchen island, open on all four sides, with its duct and wiring hidden inside a chimney that drops from above.
In Monogram's own words
Changes color as indoor air quality changes. Unit must be commissioned to Wi-Fi for IAQ sensor to become operational.
Every code on this site is taken from the manufacturer's documentation, never from a forum or a parts listing. Monogram ZVWS301/ZVWS361/ZVWS481 wall pyramid chimney hoods with Air Quality Sensors, manual 49-7000234. The ZVIS361/ZVIS481 island hoods are sold with the same Air Quality Sensors name; their manual was not read.
Monogram Indoor Air Quality (IAQ) LED range hood repair,
where we come out.
The same visit in every metro below: the code, the model number, and a diagnosis before any part is ordered.
All service areasTampa BayFL · 31 areas
Miami / South FloridaFL · 47 areas
New York MetroNY · 75 areas
HoustonTX · 36 areas
ChicagoIL · 50 areas
Los AngelesCA · 95 areas
San DiegoCA · 31 areas
Questions
about Indoor Air Quality (IAQ) LED.
Can I clear Indoor Air Quality (IAQ) LED myself?
Why doesn't the air-quality light on my Monogram hood do anything?
My Monogram hood's air light changed while nobody was cooking. Why?
Does the Monogram IAQ light turn the fan on by itself?
Back to your everyday
Still showing Indoor Air Quality (IAQ) LED?
Three things make the booking useful: the letters or blink pattern exactly as they showed, the full model number from the label behind the filters, and whether the fan still moves air on every speed. With those, the technician arrives with half the answer already worked out.