Fisher & Paykel G with FILTER lit: the integrated downdraft's grease filter needs cleaning
The CID364DTB4 pulls air down through the middle of the surface into a grease filter under a lift-out cover.
Mon–Sat, 8am–8pm
- Filter reminders
- Range hood filter and baffle service
- Source: Fisher & Paykel
Book a visit
Three short steps, about a minute.
or call (844) 398-3217
Loading appointment form…
The appointment form couldn’t load. Please try again.
What G
actually means.
The CID364DTB4 pulls air down through the middle of the surface into a grease filter under a lift-out cover. Its maintenance alert is off from the factory; once enabled, it lights FILTER and shows G for the first ten seconds after you switch on.
Fisher & Paykel range hood display · also shown as FILTER lit with G
What to do when G shows on the range hoodKind of codeFilter reminders
The hood has counted enough hours of fan time to ask for its filters: the mesh or baffle grease filters want a wash, or on a recirculating hood the charcoal filters want replacing. Most hoods count hours rather than measure grease, so the light comes on whether the filters are clean or not, and it stays on until it is reset with the key the manual names. A reminder that returns straight after a reset, or a hood that still pulls weakly with fresh filters, is worth a visit.
Usually leads toRange hood filter and baffle service
Cleaning or replacing what catches grease and odor: mesh and baffle filters, charcoal pads on recirculating hoods, and the grease channel.
Shows up asReading a Range Hood Error Code or Blinking Light
A range hood error code may appear as letters and numbers on a display, a light that blinks in a pattern, a filter reminder that will not clear, or a beep with the fan refusing to start.
MakeFisher & Paykel
Fisher and Paykel range hoods that start by themselves or refuse to stop are examined at home, beginning with any automatic setting.
SourceFisher & Paykel CID364DTB4 downdraft induction user guide (US/CA)
Series 9 36-inch induction with integrated ventilation CID364DTB4 (US/CA).
Before you book,
in this order.
Each step comes from Fisher & Paykel's own guidance for G on its range hoods. Follow it to the end: the last card says whether this is a visit.
Switch off and wait until the surface is cool.
Lift out the filter cover, rotate the grease filter to remove it, and clean both.
Refit them, then press and hold the filter key to clear the alert.
If FILTER stays lit after a proper refit, book a visit.
Still there?
It usually turns into range hood filter and baffle service. Book with the code and the model number.
What not to do
G is not a cooking zone code. If FILTER stays lit after the reset, the filter is probably not seated right rather than broken.
What you may
notice with it.
The range hood problems G tends to arrive with. Answer these at the range hood before anyone is booked.
All problems
Where G usually leads
Range hood filter and baffle service.
Fisher & Paykel
range hoods.
Fisher and Paykel range hoods that start by themselves or refuse to stop are examined at home, beginning with any automatic setting.
Fisher & Paykel range hood repairMore Fisher & Paykel codes
Filter reminders on other makes
Wall-mount range hood
The chimney hood fixed to a bare stretch of wall above the burners, its canopy catching the rising smoke while a telescoping cover hides the duct that climbs to the ceiling.
Range hood insert
The working core of a custom hood: a steel liner or power pack carrying the blower, filters, lights and controls, fitted inside a hood built of wood, plaster or metal by a cabinetmaker.
In Fisher & Paykel's own words
By default, the grease filter maintenance alerts will be deactivated.
Every code on this site is taken from the manufacturer's documentation, never from a forum or a parts listing. Series 9 36-inch induction with integrated ventilation CID364DTB4 (US/CA).
Fisher & Paykel G range hood repair,
where we come out.
The same visit in every metro below: the code, the model number, and a diagnosis before any part is ordered.
All service areasTampa BayFL · 31 areas
Miami / South FloridaFL · 47 areas
New York MetroNY · 75 areas
HoustonTX · 36 areas
ChicagoIL · 50 areas
Los AngelesCA · 95 areas
San DiegoCA · 31 areas
Questions
about G.
Can I clear G myself?
Why have I never seen G on my Fisher & Paykel downdraft?
How often should the Fisher & Paykel integrated filter be cleaned?
Can the Fisher & Paykel alert remind me about carbon filters?
Back to your everyday
Still showing G?
Three things make the booking useful: the letters or blink pattern exactly as they showed, the full model number from the label behind the filters, and whether the fan still moves air on every speed. With those, the technician arrives with half the answer already worked out.