A stainless baffle grease filter half slid out of the underside of an under-cabinet range hood, a small filter symbol glowing on the hood's control strip.

Miele charcoal filter symbol lit: recirculation filters due for replacement

In recirculation mode a Miele hood counts time on the charcoal filters separately from the grease filters.

(844) 398-3217

Mon–Sat, 8am–8pm

  • Filter reminders
  • Range hood filter and baffle service
  • Source: Miele

Book a visit

Three short steps, about a minute.

or call (844) 398-3217

What Charcoal filter symbol lit
actually means.

In recirculation mode a Miele hood counts time on the charcoal filters separately from the grease filters. The DA 6698 W default is 180 hours, adjustable to 120 or 240, or off for a hood vented outside. When the time is up, the charcoal filter symbol lights.

Miele range hood display · also shown as Filter saturation indicator (charcoal)

What to do when Charcoal filter symbol lit shows on the range hood

Before you book,
in this order.

Each step comes from Miele's own guidance for Charcoal filter symbol lit on its range hoods. Follow it to the end: the last card says whether this is a visit.

01

Fit new charcoal filters as the instructions show, taking the grease filters out first.

02

Put the grease filters back.

03

With the blower on, touch the charcoal filter control for about three seconds until only the level 1 light flashes; the symbol goes out.

04

Book a visit if the symbol will not clear.

Still there?

It usually turns into range hood filter and baffle service. Book with the code and the model number.

What not to do

This symbol is not about the washable grease filters. On a hood that vents outdoors the charcoal indicator should be switched off, so a lit charcoal symbol there is a setting to correct.

What you may
notice with it.

The range hood problems Charcoal filter symbol lit tends to arrive with. Answer these at the range hood before anyone is booked.

All problems

Where Charcoal filter symbol lit usually leads

Range hood filter and baffle service.

Mesh or baffle filters, charcoal pads and the grease channel · lowest.

In Miele's own words

changed by lighting up the grease filter
Miele DA 6698 W Operating and Installation Instructions (en-US) Miele DA 6698 W Operating and Installation Instructions (en-US) Miele DA 6698 W Operating and Installation Instructions (en-US)

Every code on this site is taken from the manufacturer's documentation, never from a forum or a parts listing. DA 6698 W wall hood in recirculation mode.

Miele Charcoal filter symbol lit range hood repair,
where we come out.

The same visit in every metro below: the code, the model number, and a diagnosis before any part is ordered.

All service areas
A family cooking together under a stainless range hood in a bright kitchen.
For the heart of your home.

Questions
about Charcoal filter symbol lit.

Can I clear Charcoal filter symbol lit myself?
Fit new charcoal filters as the instructions show, taking the grease filters out first. If it comes back, it needs a visit.
My Miele hood is ducted outside. Why is the charcoal symbol on?
Miele ships the hood set up for recirculation. For extraction mode, the charcoal filter indicator has to be switched off, which the instructions show how to do.
How long do Miele charcoal filters last?
The counter defaults to 180 hours of use and can be set to 120 or 240. Strong cooking smells may call for the shorter setting.
Do I reset the Miele charcoal count with the hood on or off?
On. Touch the charcoal filter control for about three seconds with the blower running, until only the level 1 light flashes.

Back to your everyday

Still showing Charcoal filter symbol lit?

Three things make the booking useful: the letters or blink pattern exactly as they showed, the full model number from the label behind the filters, and whether the fan still moves air on every speed. With those, the technician arrives with half the answer already worked out.

(844) 398-3217 Schedule a repair