La Cornue six indicators flashing: Château hood grease filters are due
The Château hood controller adds up the time the blower runs.
Mon–Sat, 8am–8pm
- Filter reminders
- Range hood filter and baffle service
- Source: La Cornue
Book a visit
Three short steps, about a minute.
or call (844) 398-3217
Loading appointment form…
The appointment form couldn’t load. Please try again.
What All 6 indicators flashing
actually means.
The Château hood controller adds up the time the blower runs. After 30 hours of running it lights every indicator in a flashing pattern to ask for the grease filters to be cleaned, and it keeps doing so until the count is reset.
La Cornue range hood display · also shown as six indicators flashing, GREASE FILTER CLEANING
What to do when All 6 indicators flashing shows on the range hoodKind of codeFilter reminders
The hood has counted enough hours of fan time to ask for its filters: the mesh or baffle grease filters want a wash, or on a recirculating hood the charcoal filters want replacing. Most hoods count hours rather than measure grease, so the light comes on whether the filters are clean or not, and it stays on until it is reset with the key the manual names. A reminder that returns straight after a reset, or a hood that still pulls weakly with fresh filters, is worth a visit.
Usually leads toRange hood filter and baffle service
Cleaning or replacing what catches grease and odor: mesh and baffle filters, charcoal pads on recirculating hoods, and the grease channel.
Shows up asReading a Range Hood Error Code or Blinking Light
A range hood error code may appear as letters and numbers on a display, a light that blinks in a pattern, a filter reminder that will not clear, or a beep with the fan refusing to start.
MakeLa Cornue
A La Cornue hood is serviced with care for its finish, and the technician protects the metal and the burners below before work begins.
SourceLa Cornue Château range hood installation and user guide (110-120V 60Hz models)
La Cornue Château wall hoods (LCH-950 to LCH-1850), Château Suprême hoods and LCHI island hoods on 110-120V, 60Hz.
Before you book,
in this order.
Each step comes from La Cornue's own guidance for All 6 indicators flashing on its range hoods. Follow it to the end: the last card says whether this is a visit.
Switch the hood off and remove the grease filters.
Clean them and wipe the grease from the hood surfaces around the filter openings.
Refit the filters and press the run-on timer button to reset the count.
If the six lights keep flashing after the reset, book a visit to check the controller.
Still there?
It usually turns into range hood filter and baffle service. Book with the code and the model number.
What not to do
Six flashing lights do not mean the remote or the blower has failed. A hood that ignores both the buttons and the remote with no lights at all is a different problem, usually the red reset switch behind the filters or the power supply.
What you may
notice with it.
The range hood problems All 6 indicators flashing tends to arrive with. Answer these at the range hood before anyone is booked.
All problems
Where All 6 indicators flashing usually leads
Range hood filter and baffle service.
La Cornue
range hoods.
A La Cornue hood is serviced with care for its finish, and the technician protects the metal and the burners below before work begins.
La Cornue range hood repairMore La Cornue codes
Filter reminders on other makes
Wall-mount range hood
The chimney hood fixed to a bare stretch of wall above the burners, its canopy catching the rising smoke while a telescoping cover hides the duct that climbs to the ceiling.
Island range hood
The hood that hangs from the ceiling over burners set into a kitchen island, open on all four sides, with its duct and wiring hidden inside a chimney that drops from above.
Range hood insert
The working core of a custom hood: a steel liner or power pack carrying the blower, filters, lights and controls, fitted inside a hood built of wood, plaster or metal by a cabinetmaker.
In La Cornue's own words
After 30 hours accumulated running, GREASE FILTER CLEANING will be signalled by all 6 indicators flashing.
Every code on this site is taken from the manufacturer's documentation, never from a forum or a parts listing. La Cornue Château wall hoods (LCH-950 to LCH-1850), Château Suprême hoods and LCHI island hoods on 110-120V, 60Hz.
La Cornue All 6 indicators flashing range hood repair,
where we come out.
The same visit in every metro below: the code, the model number, and a diagnosis before any part is ordered.
All service areasTampa BayFL · 31 areas
Miami / South FloridaFL · 47 areas
New York MetroNY · 75 areas
HoustonTX · 36 areas
ChicagoIL · 50 areas
Los AngelesCA · 95 areas
San DiegoCA · 31 areas
Questions
about All 6 indicators flashing.
Can I clear All 6 indicators flashing myself?
How often will my La Cornue Château hood flash for its filters?
Which button resets the flashing on a La Cornue hood?
Is the island Château hood the same?
Back to your everyday
Still showing All 6 indicators flashing?
Three things make the booking useful: the letters or blink pattern exactly as they showed, the full model number from the label behind the filters, and whether the fan still moves air on every speed. With those, the technician arrives with half the answer already worked out.